Braun 34443 Automobile User Manual


 
Page 9
Whenever parking your Entervan
and before utilizing Entervan
power features, always engage
the vehicle transmission in Park
“P” and engage the vehicle
parking brake. Entervan power
function control switches can
be activated only if the vehicle
transmission is in Park or Neutral.
Terminology
“Kneeling” is the lowering motion
of the Entervan electromechani-
cal rear suspension. The term
“deploy” (unfold) indicates the
lowering motion of the ramp to
the deployed position. “Stow”
(fold) is the raising motion of the
ramp to the vertical (stowed)
position.
The terms “Open” and “Close”
refer to sequences of power
functions that will occur when
activated by the One-Touch
electronic control system. When
activating the Open functions,
the power door opens, the kneel
system lowers the rear of the
vehicle and the ramp deploys.
When activating Close functions,
the ramp stows, the kneel sys-
tem raises the rear of the vehicle
and the power door closes.
One-Touch Control System
Entervan power functions are
managed by the electronic
control system. The control
system can be activated using
the remote keyless entry trans-
mitter or any one of the controls
addressed on pages 10-13.
Do not attempt to interface
aftermarket control systems.
OPERATION
Braun Corporation
Aftermarket Control
Systems Policy:
The Braun Corporation manufac-
tures dedicated control systems
for its products. These control
systems have been designed
and tested for use in conjunction
with specic Braun products.
Braun control systems are the
only control systems authorized
for use with Braun products.
Do not attempt to interface after-
market control systems without
authorization from The Braun
Corporation. To do so may
result in serious bodily injury
and/or property damage.