Filter
Top Products
Driving
70
One lever for all functions
1 Maintaining, storing and increasing speed
2 Maintaining speed, storing speed, and
decelerating
3 Interrupting and deactivating system
4 Resuming stored speed
Maintaining, storing and increasing
speed
Press lever to resistance point, arrow 1:
The speed currently being driven is maintained
and stored. The display 1 in the speedometer,
see below, indicates this regulated speed.
Every time you press the lever, the vehicle's
speed increases by roughly 1 mph/1 km/h.
Press lever to resistance point for a longer time:
The vehicle accelerates without pressure on
the accelerator pedal. The system maintains
and stores your current speed as soon as you
release the lever.
Press the lever beyond the resistance point:
The speed is increased to the next fives posi-
tion in the mph display or the next tens position
in the km/h display.
Press and hold the lever beyond the resistance
point:
The vehicle accelerates more quickly.
Maintaining speed, storing speed, and
decelerating
Pull the lever, arrow 2:
Functions are the same as 1; the speed is
reduced.
Interrupting system
Press the lever up or down, arrow 3: the
display 1 in the speedometer changes color.
In addition, the system is interrupted:
> when you apply the brakes, even with the
handbrake
> when you shift very slowly, when you shift
the manual transmission into idling mode,
or when you shift the automatic transmis-
sion into the N position
> when DTC is activated or DSC is deacti-
vated
> when the DSC comes on
Resuming stored speed
Press button 4:
The stored speed is resumed and maintained.
Deactivating system
> Press the lever up or down twice, arrow 3
> Switch off the ignition
The speed stored in the memory is deleted.
Displays in instrument cluster
1 Stored speed
2 Selected speed is displayed briefly
Online Edition for Part no. 01 41 2 600 310 - © 02/08 BMW AG