Filter
Top Products
95
Entertainment OverviewControlsDriving hintsNavigationMobilityReference
Saloon
The second value in each case applies when
towing a trailer.
0 / 1 = 1 to 2 persons without luggage
1 / 1 = 5 persons without luggage
1 / 2 = 5 persons with luggage
2 / 2 = 1 person, luggage compartment full
Comply with rear axle load limit, see page 214
onwards.
Touring
All load conditions: 0.
Exception: 1 person, load area full and with a
trailer being towed: 1.
Comply with rear axle load limit, see page 215
onwards.
Xenon headlights*
The headlight beam throw is regulated auto-
matically, e.g. when accelerating and braking
and to adapt to the different loads being carried.
High-beam headlights/
parking lights
1 High-beam headlights
2 Headlight flasher
3 Parking lights
Right or left parking lights*
There is an additional option of switching on the
lights on the side of the car facing the road
when parked, if permitted in the country of use:
Once you have switched the engine off, push
the lever beyond the pressure point in the cor-
responding direction 3.
The parking lights will drain the battery.
Do not leave them switched on for too
long, otherwise the engine may fail to start.<
High-beam headlights
assistant*
Principle
This system switches the high-beam head-
lights on and off automatically. The process is
controlled by a sensor on the front of the inside
mirror. The assistant ensures that the high-
beam headlights are switched on whenever
permitted by the situation in which the car is
being driven. This relieves the load on you the
driver and optimises your view of the road. You
can of course intervene at any time and switch
the high-beam headlights on and off in the
usual way.
Activating the high-beam headlights
assistant
1. Turn the illumination switch to switch
position 1, see page 93.
2. With the low-beam headlights switched on,
briefly press the flashing turn indicator lever
towards high-beam headlights.
Online Edition for Part-No. 01 41 0 159 725 © 09/05 BMW AG