Filter
Top Products
Everything under control
74
3. Turn the controller until "Display settings"
is selected and press the controller.
4. If necessary, move the controller forwards
to move the highlight marker to the upper-
most field.
5. Turn the controller until "Time" is selected
and press the controller.
6. Turn the controller until "Set time" is
selected and press the controller.
Adjusting settings
7. Turn the controller to set the hours and
press the controller.
8. Turn the controller to set the minutes and
press the controller.
The system accepts the new time.
Switching on the hour signal*
You will hear three tones just before each full
hour.
Select "Hour memo" and press the controller.
The hour signal is activated.
Setting the time format
1. Open the start menu.
2. Press the controller to open the menu.
3. Select "Display settings" and press the
controller.
4. Select "Time" and press the controller.
5. Select "Time format" and press the control-
ler.
6. Select the desired format and press the
controller.
Date
The settings are stored for the remote control
currently in use, refer also to Personal Profile on
page 28.
Setting the date
In the instrument cluster
To set the dd/mm or mm/dd date format, refer
to Setting the date format below.
ba8_E9293_US.book Seite 74 Freitag, 5. Mai 2006 1:02 13
Online Edition for Part no. 01 41 0 012 346 - © 05/06 BMW AG