Filter
Top Products
13
Details of Programming
Pilot (Power-on indication)
Note: When you are using the Dark mode,
the display will only show HD, AD, or CD,
(Highway-Dark, AutoScan-Dark, or City-
Dark).
Pilot HWY
(Full description)
In this setting, your V955 will display
“Highway,” “City,” or “AutoScan” as its
power-on indication. (factory default)
Pilot H
(Letter)
In this setting, your V955 will display “H”
for Highway, “C” for City, and “A” for
AutoScan.
Voice
Voice On (Voice announcements on)
In this setting, all radar, laser, and SWS
messages (if programmed) will be
announced using a digital voice.
Voice Off
(Voice announcements off)
In this setting, only the distinct audio tone
will be heard when a radar, Laser, or SWS
message is detected.
Power-on Sequence
PwrOnSTD (Standard)
In this setting, each time you turn on your
V955, it will display “BEL V955,” “Laser,”
“Ka-band,” “K-band,” “X-band,” “Safety,”
followed by a brief X-band alert. (factory
default)
If any bands have been changed from
the factory default settings, a double X-band
tone and corresponding message
(i.e. “SWS ON”), will alert you that one or
more bands have been changed.
PwrOnFST
(Fast power-on)
In this setting, your V955 will provide a
single X-band tone. If any bands have been
changed from the factory default settings, a
double X-band tone and corresponding
message (i.e. “SWS ON”), will alert you that
one or more bands have been changed.
AutoMute
aMute ON (AutoMute on)
In this setting, your V955’s audio alerts will
initially be at the volume you set, but after a
few seconds, the V955 will automatically
reduce the volume level, to keep you
informed, but not annoyed. (factory default)
aMuteOFF
(AutoMute off)
With AutoMute off, your V955’s audio alerts
will remain at the volume you set for the
duration of the radar encounter.