Filter
Top Products
Controls and Features
Power
To turn your V955 on or off, press the PWR
button located on the top. When you turn
your V955 on, it goes through a sequence of
alerts.
If you prefer, you may program your
V955 for a shorter power-on sequence. See
the Programming section for details.
Volume
Press and hold the Volume/Mute button
located on the top case to adjust the V955’s
alert volume level. The audio will ramp up
and down, accompanied by a bar-graph on
the display. Once you’ve reached your
preferred audio level, simply release the
button.
Power-on indication
After the V955’s start-up sequence is
complete, the alphanumeric display will
show Highway, AutoScan, or City to
indicate which sensitivity mode is selected.
If you prefer, you can select alternate
power-on displays. See the Programming
section for details.
Voice Alerts
The V955 provides digital voice announce-
ments of radar and laser bands detected. If
Safety Radar (SWS) is turned on, a safety
radar message will also be announced. See
the Programming section for details.
If you prefer, you can turn Voice Alerts
off. See Programming section for details.
AutoMute
Your V955 has our patented AutoMute
feature. After the V955 alerts you to a radar
encounter at the volume you have selected,
the AutoMute feature will automatically
reduce the volume to a lower level. This
keeps you informed without the annoyance
of a continuous full-volume alert.
If you prefer, you can turn the
AutoMute feature off. See the Programming
section for details.
Mute
The Mute button, located on the V955’s top
case, allows you to silence the audio alert
during a radar encounter.
To mute the audio for a single specific
signal, briefly press the Mute button. After
that radar encounter has passed, the mute
will automatically reset and the audio will
alert you to the next encounter.
8