Filter
Top Products
Programming
12
There are 6 user-selectable options so you
can customize your V965 for your own
preferences. The buttons labeled CITY and
BRT are also used to enter the Program
Mode, REVIEW your current program
settings, and to CHANGE any settings as
desired. The words PGM, RVW, and CHG
are located on the top of the detector, and
are highlighted in colored graphics. Pages
14-16 explain each option in more detail.
How to use Programming
1 To enter Program Mode, press and
hold both the CITY and BRT buttons
down for 2 seconds. (The unit will beep
twice, and will display the word Program
).
2 Then press the RVW button to
review the current settings. (You can
either tap the button to change from item to
item, or hold the button to scroll through
the items).
3 Press the CHG button to change
any setting. (You can either tap the button
to change from setting to setting, or hold
the button to scroll through all the options).
4 To leave the Program Mode, simply
wait 8 seconds without pressing any
button, or press the PWR button. (The
unit will display Complet
e, beep 4 times,
and return to normal operation).
An example
Here is how you would turn V965’s
AutoMute feature off.
1 Enter the Program Mode by holding
both the CITY and BRT buttons down for
2 seconds. V965 will beep twice and
display Program
.
2 Then hold the RVW button down.
V965 will scroll through the categories,
starting with Pilot (Pilo
t), Voice
(Voic
e), Power-on sequence (PwrOn),
and then AutoMute (aMut
e).
3 Release the RVW button when V965
shows the AutoMute item. Since the factory
setting is for AutoMute to be on, V965 will
display aMute O
N.
(If you accidentally don’t release the
RVW button in time, and V965 goes to the
next category, hold the RVW button down
again, and after V965 scrolls through all
categories, it will begin again at the top of
the list.)
4 Press the CHG button to change from
aMute ON
to aMute OFF.
5 To complete the Programming, simply
wait 8 seconds without pressing any button,
or press the PWR button. The V965 will
display Complet
e, beep 4 times, and return
to normal operation.
Overview of Programming
13
Pilot HWY
Pilot H
Voice ON
Voice OFF
PwrOn STD
PwrOn FST
aMute ON
aMute OFF
City STD
City LoX
City NoX
Bands DFT
Bands MOD
POP ON or OFF (default is off)
SWS ON or OFF (default is off)
Press the CHANGE button
to change your setting
within a category
*Full word: Highway or AutoScan or City
Letter: H or A or C
*Voice alerts on
Voice alerts off
*Standard power-on sequence
Fast power-on sequence
*AutoMute on
AutoMute off
*Standard City mode sensitivity
Low X band sensitivity in City Mode
No X band sensitivity in City Mode
*Factory default settings
Factory default settings modified
Turn bands “ON” or “OFF” by
pressing the VOLUME/MUTE button
Press the REVIEW
button
to go from one category
to the next
PILOT
(Power-on indication)
VOICE
POWER-ON SEQUENCE
AUTOMUTE
CITY MODE SENSITIVITY
BANDS
* Factory Default Settings
To reset V965 to its original factory
settings, press and hold the “CITY”
and “BRT” buttons while turning
the power on. V965’s display will
provide a “Reset” message,
accompanied by an audible alert,
acknowledging the reset.