Filter
Top Products
The Bel V965 is the most advanced radar,
laser and safety detector ever designed by
Beltronics.
The Bel V965 includes full X, K,
SuperWide Ka, and Safety Warning System
radar capability, front and rear laser
detection, varactor-tuned (VTO) microwave
receiver, digital signal processing (DSP) for
superior range and reduced false alarms, our
patented Mute and AutoMute, audible and
visual band alerts, and all the performance
you’d expect from Beltronics.
In addition, the Bel V965 introduces
the follow revolutionary features:
• Varactor-tuned receiver provides
long-range protection against all
radar threats
• New easy-to-use Programming lets
you customize up to 6 features
• New AutoScan mode intelligently
reduces unwanted false alarms, plus
Highway and City settings
• Ultra-bright text-display provides
easy to read information from any
angle
• Detects and decodes Safety Warning
System messages
If you’ve used a radar detector before, a
review of the Quick Reference Guide on
pages 4 and 5, and the Programming
information on pages 12 and 13 will briefly
explain the new features.
If this is your first detector, please read
the manual in detail to get the most out of
your V965’s outstanding performance and
innovative features.
Please drive safely.
Congratulations Quick Reference Card
1
Programming Details ̈
Factory Default Settings
To reset V965 to its original factory
settings, press and hold the “CITY” and
“BRT” buttons while turning the power
on. V965’s display will provide a “Reset”
message, accompanied by an audible
alert, acknowledging the reset.
BEL V965 Quick Reference Card
̄
Remove card along perforations
̄
̄
Remove card along perforations
̄
An example
Here is how you would turn V965’s
AutoMute feature off.
1 Enter the Program Mode by holding
both the CITY and BRT buttons down for 2
seconds. V965 will beep twice and display
Program.
2 Then hold the RVW button down. V965
will scroll through the categories, starting
with Display (Pilot), then Voice(Voice),
then Power-On sequence (PwrOn), and
then AutoMute (aMute).
3 Release the RVW button when V965
shows the AutoMute item. Since the
factory setting is for AutoMute to be on,
V965 will display aMute ON.
(If you accidentally don’t release the
Review button in time, and V965 goes to
the next category, hold the RVW button
down again, and after V965 scrolls
through all categories, it will begin again
at the top of the list.)
4 Press the CHG button to change from
aMute ONto aMute OFF.
5 To complete the Programming, simply
wait 8 seconds without pressing any button.
The V965 will display Complete, beep 4
times, and return to normal operation.
There are 6 user-selectable options so you
can customize your V965 for your own
preferences.
The buttons labeled CITY and BRT are
also used to enter the Program Mode,
REVIEW your current program settings, and
to CHANGE any settings as desired. The
words PROGRAM, RVW and CHG are
located on the top of the detector, and are
highlighted in graphics.
How to use Programming
1To enter Program Mode, press and
hold both CITY and BRT buttons down
for 2 seconds. (The unit will beep twice,
and will display the word “Program”).
2Then press the RVW button to review
the current settings. (You can either tap
the button to change from item to item, or
hold the button to scroll through the items).
3Press the CHG button to change any
setting. (You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options).
4To leave Program Mode, simply wait
8 seconds without pressing any button.
(The unit will display Complete, beep, and
return to normal operation).