Filter
Top Products
Table of Contents
Quick Reference Guide 4-5
Installation 6-7
• Power Connection 6
• Mounting Location 6
• Windshield Mount 7
Controls and Features 8-11
• Power and Volume Control 8
• Power-on Indication 8
• Voice 8
• AutoMute 8
• Mute 8
• Sensitivity Button 9
• Brightness 9
• Audible Alerts 10
• Power Connector 10
• Signal Strength Meter 10
• Threat Display 11
• Tech Display 11
Programming 12-16
• How to use Programming 12
• Example of Programming 12
• Overview of Programming 13
• Details of Programming 14-16
Technical Details 17-23
• Specifications 17
• Interpreting Alerts 18-19
• How Radar Works 20
• How “POP” Works 20
• How Laser Works 21
• How TotalShield
™
Technology Works 22
• How Safety Radar Works 22-23
Service 24-29
• Troubleshooting 24-25
• Service 26
• Registration 27-28
• Warranty and Accessories 29
32
Quick Reference Card
BELTRONICS STi DRIVER Quick Reference Card
* Factory Default Settings
̄ Remove card along perforations ̄
̄ Remove card along perforations ̄
Press the RVW button
to go from one category
to the next
DISPLAY
PILOT
(Power-on indication)
ALERT LAMP
VOICE
POWER-ON SEQUENCE
SIGNAL STRENGTH METER
AUTOMUTE
BRIGHTNESS
BANDS
Disp STD
Disp INV
Pilot HWY
Pilot H
Pilot V
Alamp ON
Alamp OFF
Voice ON
Voice OFF
PwrOn STD
PwrOn FST
Meter STD
Meter THT
Meter TEC
aMute ON
aMute OFF
Brt Auto
Brt Min
Brt Med
Brt Max
Brt Dark
Bands DFT
Bands MOD
X ON
or OFF (default is on)
KONor OFF (default is on)
Ka ON or OFF (default is on)
POP ON or OFF (default is off)
LSR ON or OFF (default is on)
SWS ON or OFF (default is off)
Press the CHG button
to change your setting
within a category
*Standard display
Inverted display
*Full word: Highway, AutoScan, etc.
Letter: H, A, C, or Cnx
Vehicle voltage
*Alert lamp on
Alert lamp off
*Voice alerts on
Voice alerts off
*Standard power-on sequence
Fast power-on sequence
*Standard signal strength meter
Threat Display
Tech Display
*AutoMute on
AutoMute off
*Automatic brightness
Minimum brightness
Medium brightness
Maximum brightness
All dark
*Factory default settings
Factory default settings modified
Turn bands “ON” or “OFF” by
pressing the “SENS” button