Filter
Top Products
Once all the information above has been veried and correct, refer back
to the 2 sets of led ashes during the auto detect sequence. Here is what
the ashes stand for:
LED Feedback
The led ashes represent what brand radio the RFASWC believes it
is connected to. Each ash is for a different radio manufacturer. For
example you installed a JVC radio; the led should ash 5 times.
1st led ash is for Eclipse
2nd led ash is for Kenwood
3rd led ash is for Clarion
4th led ash is for Sony and Dual
5th led ash is for JVC
6th led ash is for Pioneer and Jensen
7th led ash is for Alpine*
8th led ash is for Visteon
9th led ash is for Valor
10th Clarion 5V
* Note: If the ASWC ashes 7 times and you do not have an Alpine
radio connected to it that means that the RFASWC did not see any radio
connected. Verify the 3.5mm connector is connected to the SWC input on
the radio.
5