Filter
Top Products
®2002 Directed Electronics, Inc.
31
Quick Reference Guide
Arming
■ To arm, press . When the system arms, you will hear two short chirps,
and the indicator lights will flash twice.
Disarming
■ To disarm, press . You will hear a chirp, and the indicator lights will
flash once.
Siren Silencing
■ For siren silencing, press on your transmitter (whist the siren is
sounding) and the siren will stop sounding. To completely disarm the
security system, press again.
Disarming Without a Transmitter
■ Turn on the ignition. Press the Valet switch the number of times that cor-
responds with the first number of your Valet code. Turn the ignition off,
then back on. Press the Valet switch the number of times that corre-
sponds with the second digit of your Valet code. Turn the ignition off,
then back on. Press the Valet switch the number of times that corre-
sponds with the third digit of your Valet code. Turn the ignition off, then
back on again. Press the Valet switch the number of times that corre-
sponds with the fourth digit of the Valet code. Turn the engine off. If you
have entered the proper code, the alarm will emit two chirps and then
turn off. Five chirps indicate the wrong code has been entered. Re-enter
your Valet code starting at digit one.
Remote Controlled Chirp Muting
■ Pressing the button for one to two seconds will arm and disarm your
system without the siren chirp confirmation.
Panic Mode
■ Press and hold down for 3-4 seconds to activate Panic Mode. Press
to stop panic mode at any time.
Location of Valet Switch_______________________________
Valet PIN Number_____________________________________
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
✂
✂