Avital MAXX2 Automobile Alarm User Manual


 
®2002 Directed Electronics, Inc.
14
To De-activate:
1. Press the button for one to two seconds.
2. The siren will shut off and the indicator lights will stop flashing.
If the optional Two-Stage Unlock feature was installed, press the
button for one to two seconds and only the drivers door will
unlock. Within three seconds, press the button again and the
passenger door(s) will unlock.
NOTE: If you opted to have the Two-Stage unlock feature installed, then
unlocking your vehicle from the drivers door with the key will not unlock
the passenger door(s). They will have to be unlocked manually.
If you wish to arm the alarm system but leave a window or sun-
roof open or a pet or passenger inside the vehicle, you will need
to bypass the Ultrasonic Sensor and any optional sensors by fol-
lowing the procedure noted below:
1. Arm the alarm with the or buttons.
2. At anytime after the alarm system has been armed, press the
and buttons together.
3. To indicate sensor(s) bypass the indicator lights flash once.
NOTE: The next time the alarm system is armed the sensors will be re-
enabled automatically.
Sensor Bypass
Two-Stage Unlock Capability