Avital MAXX2 Automobile Alarm User Manual


 
®2002 Directed Electronics, Inc.
22
When Auto-rearm and lock is used in conjunction with the passive
arming feature (i.e. both are turned ON) the following will occur:
If after driving you turn the ignition off and exit the vehicle by
opening and closing a door, the system will passive arm but NOT
lock the doors in case you have left your keys inside the car.
If the alarm is disarmed only and you open and then close a
door, the system will passive arm but NOT lock the doors,
again in case you left your keys inside.
If you disarmed the alarm but did not open a door, the sys-
tem will auto-rearm and lock the doors.* As you did not open
a door the system assumes you are outside the vehicle and
the keys are not inside.
* Requires connection to the vehicle’s existing central locking system.
For the ultimate in security and convenience, the system is pro-
grammed to automatically lock your doors when the ignition key
is turned ON or the engine is started*, and will unlock when the
ignition key is turned OFF. This feature can be programmed ON or
OFF. (See the Programming Table for System Features section of
this guide.)
NOTE: If this feature is turned on and you need to open a door to let
someone in or out of the car when the ignition is on, you can press the
button to unlock the doors and again to re-lock after the doors
have been closed.
* Requires connection to the vehicle’s existing central locking system.
Ignition-Controlled Door Lock/Unlock
Auto-Rearm and Lock