19
© 2008 directed electronics—all rights reserved
➤
RReemmoottee CCoonnttrrooll LLCCDD
- The full trigger alert icon (28) will
dimly illuminate for two seconds
➤ The transceiver will enter Page Recognition Mode and
operate alarm page alerts.
triggered response description
A Triggered Response can be activated by any of the triggers listed
below and consists of an alarm page along with the response
described for each trigger. The Triggered Response duration is 30
seconds.
➤
SSeennssoorr TTrriiggggeerr
- Heavy impacts to the vehicle will instantly
sound the siren and flash the lights for the programmed
duration and report Zone 2.
➤
DDoooorr TTrriiggggeerr
- If a door is opened the siren will chirp for three
seconds, then the siren will sound and the lights will flash for
the programmed duration and report Zone 3. The three
seconds allow the user time to disarm the system with a
minimum of noise should a door be opened inadvertently
while the system is armed.
➤
HHoooodd TTrriiggggeerr
- Opening the hood (if connected) will sound
the siren, flash the lights for the programmed duration, and
report Zone 1.
➤
TTrruunnkk TTrriiggggeerr
- Opening the trunk (if connected) will
instantly sound the siren and flash the lights for the
programmed duration and report Zone 1.
➜
note: Icons 13 and 14 represent alarm system zone
inputs. For more information about icons and the zones
they represent refer to the Standard Remote Configurations
section.