Filter
Top Products
22
© 2008 directed electronics—all rights reserved
To disarm the security system,
turn the ignition to the ON posi-
tion. Press the Valet button
within 15 seconds. After five
seconds, the system will disarm. If
the system does not disarm, you
may have waited too long; turn
the ignition off and on and try
again.
Location of Valet Button_________________________________
silent mode
To temporarily turn off the arm or disarm chirps, use Silent
Mode™. Simply press for less than one second before
arming or disarming, and the confirmation chirp(s) will be elim-
inated for that one operation only. If you want the arm/disarm
chirps turned off permanently, your dealer can do this for you.
note: The Warn Away
®
response to lighter impacts is
bypassed if the system is armed using Silent Mode. This
ensures that no chirps will be emitted by the siren in an
area you want chirp-free. The system is still fully capable
of triggering by heavy impacts. Only the Warn Away
®
response is bypassed.
➜
DRW-35