Autostart CT-5060 Automobile Alarm User Manual


 
Car Finder
When enabled, the Car Finder option will help you locate your vehicle by sending a
pulsating signal through the horn or the siren. To hear the signal, press the
LOCK and
UNLOCK buttons simultaneously. This will produce a pulsating signal for the time you keep
the buttons pressed.
Diagnostics – Chirps Diagnostics – Parking Lights
Parking Lights Flash Rate (Normal Operation)
Flashes Description
1
Doors locked, Starter Kill armed.
End of Run Time.
TRUNK button pressed
Start signal received by the Module.
Cold Weather Mode cancelled.
Cannot start after maximum number of attempts is reached.
2
Run Time cancelled.
Remote start attempt cancelled by remote.
Doors unlocked, Starter Kill disarmed.
Exit Remote Valet
Exit ignition valet
Chirps Description
1
Lock and arm the system.
Lock confirmation.
Entering Mode 1 in the programming options.
Start attempt when engine is already running under remote control.
2
Unlock and disarm.
Transmitter learnt.
Entering Remote Valet.
Entering Mode 2 in programming options.
3
Lock and arm – a zone is unprotected.
Entering Mode 3 in the programming options.
4
Unlock and disarm – an intrusion occurred.
Entering Tach Learning procedure.
5
Siren or Horn Chirp Timing adjustment.
Constant up
to
60 seconds
In Siren Mode: alarm condition
g
enerated b
y
an intrusion, b
y
Panic
Mode or when the Module is powered up. The Siren will sound fo
r
60 sec.
Constant up
to
30 seconds
In Horn Mode: alarm condition
g
enerated b
y
an intrusion, b
y
Panic
Mode or when the Module is powered up. The Horn will sound fo
r
30 sec.
P. 9 User Guide CT-5060