Filter
Top Products
P. 8 User Guide
For 2-WAY LCD remote:
• Press and hold the
FUNCTION button until you hear a “beep”. Within 3 seconds,
release the
FUNCTION button and L-01 will appear on the LCD display. Press and
hold the
FUNCTION button once more until you hear another “beep”. L-02 will be
displayed. This display means that you are now in Multi-car Operation Mode.
Simply press the corresponding button to access the desired feature:
• ......................................................................Lock
• ............................................................ Unlock
• ........................................................Aux 2
• . ...................................................... Aux 3
Or
• + simultaneously...........................Lock
• + simultaneously .................... Unlock
• + simultaneously ...................Aux 2
• ¾ ¾ …………………. Aux 3
Temporary Chirp Delete
If you want to avoid the siren chirps in a quiet neighbourhood when arming or disarming the
system, press the
TRUNK button until you see the parking lights flash and hear 1 beep. Then
within 3 seconds, press the
LOCK or UNLOCK to arm or disarm the vehicle without generating the
siren chirps.
Note: Your installer could program the chirp disable feature, so that the chirps are disabled permanently.
Priority Door Access
(Enabled by default.) If the Remote Door Locks option is installed on your vehicle, this safety
feature allows you to unlock solely the driver’s door with a single press of the
UNLOCK button on
the transmitter. Upon a second press of the
UNLOCK button, all the doors will unlock, except for the
driver’s door. With a third press of the
UNLOCK button, all the doors will unlock.
Alarm Functions
(The siren and the shock detectors are optional)
Your installer can program your alarm in passive arming mode, so that the system automatically
arms itself when you leave your vehicle, or in active arming mode, so that you can arm or disarm
your car at will.
In either mode, you can arm or disarm your alarm system using your remote control as well as lock
or unlock your doors.
When an intrusion from the door, hood, trunk, shock or ignition is detected, the 2-way LCD remote
will send beeps or vibrate for about 60 seconds. At the same time, the LCD remote will display