Filter
Top Products
LCD Remote Functions
The Transmitter offers several command-confirmation and timer features. This
section explains some of the key functions available on the Remote Control. Next
section gives a summary of the button combinations used to access the functions
(see LCD Remote Operation Tables).
Note:
If you wish to exit a function while still in the process of accessing it, simply stop and wait for at
least 10 seconds: the Remote Control will return to its normal state.
Basic Vehicle Operation
The vehicle can be remote-started and stopped using the
START/STOP ( ) button. The
TRUNK ( ) button will open the Trunk (if this feature is installed on the vehicle). The LOCK
( ) and UNLOCK ( ) buttons will lock and unlock the Doors of the vehicle (if the Remote
Door Lock feature is installed on the vehicle) and arm or disarm the Starter Kill (if installed).
The
FUNCTION ( ) button is used to access all advanced functions of the Remote Control.
(Refer to the LCD Operation and Confirmations tables.)
Alarm Clock
The LCD Remote Control has a built-in Alarm Clock which can be set up using the but-
ton. Use the
and buttons to switch the Alarm Clock on and off (refer to the tables).
Time Adjust Mode
Use Time Adjust Mode to set the current time on your Remote Control using the button
(refer to the tables).
Countdown Timer
This feature allows set up a countdown of a duration entered by the user in hours and
minutes using the button (refer to the tables).
AS-2510 TW User Guide P. 4