Filter
Top Products
AS-1412 User Guide P. 5
will also lock the doors). In Passive Mode, the system will automatically arm 1 or 3 minutes
after the engine is shut down.
Installer-programmable Features
The system was designed with flexibility and OEM integration in mind. With its programmable
options, this unit can control nearly any electrical system in your vehicle.
Note: The programming of these features should be left to a professional. Changing any
one of the settings may adversely affect the operation the Module.
The user-selectable options are as follows:
x Remote door locks
x Ignition-controlled door locks
x Secure lock
x Remote trunk release
x Engine run time
x Idle Mode
x Starter Kill / Anti-Grind
Remote Door Locks Option
Your Module can be installed with the Remote door Locks option.
Ignition-controlled Door Locks Option
This is an added security feature. If your system was installed with the Ignition-controlled
Door Locks option, the doors will automatically be locked as soon as the user presses the
brakes while the ignition key is in the
IGNITION ON (RUN) position.
When the key is turned to the Ignition
OFF position, the doors will automatically be unlocked.
(Only available if remote Door Lock Option is installed)
Secure Lock Option
Before it can remote-start your vehicle, the module must first disarm the factory security
system.
The Secure Lock feature may be required on certain vehicle models with factory security
systems that automatically unlock the doors when the security system is disarmed.
To keep your vehicle protected when the factory security system is disarmed for a remote
start, Secure Lock will relock your doors as soon as the vehicle has started.
Once the engine run cycle ends, Secure Lock will rearm your factory security system.
Remote Trunk Release Option
If your system was installed with the Remote Trunk Release, you can open your trunk by
pressing buttons ,,, simultaneously on the remote transmitter. Vehicles must have an
electric
TRUNK switch or a remote TRUNK button on the vehicle’s OEM Transmitter for this
option to be compatible with the Module.
Engine Run Time
(Gas 15 minutes, Diesel 20 minutes by default) If you have a gas engine, your system can
be programmed to run the engine for 4, 15, or 25 minutes (15 minutes by default). If you
have a diesel engine, it can be programmed to run the engine for 9, 20, or 30 minutes).
Starter Kill / Anti-Grind
This added security feature will immobilize your vehicle when the system is armed
(LOCKED). If your Module was installed with the Starter Kill option, you will not be able to
start your vehicle with the key unless the system has been disarmed first (UNLOCKED).
The Starter Kill option can be programmed to be
ACTIVE (will not arm automatically) or PASSIVE
(will arm automatically). In PASSIVE Mode, your installer can program it to arm automatically in
1 or 3 minutes.
Once the vehicle has been remote started, the Anti-Grind feature prevents the starter motor
from re-engaging when the ignition key is accidentally turned to the
CRANK position.