Filter
Top Products
ENTER STEPS:
1. Press the
button to remote start the vehicle(Waiting for the Parking
Lights to stay on).
2. Immediately depress the
button, then immediately,
3. Depress and Hold down the button until the parking lights flash (3)
times and the siren or horn chirps (3) times.
The vehicle is now programmed to start every (3) hours.
4. Press the brake pedal to stop the vehicle running.
Exit the timer start:
Timer start can be exited manually as follows:
1. REPEAT the “ENTER STEPS” from above,
-OR-
2. Turn the ignition on. The LED and parking light will flash (4) times. The
horn chirps (4) times.
The vehicle is no longer programmed to start automatically.
F. SHUT-DOWN INPUT FOR REMOTE STARTER:
If any of the following conditions exist while the system is operating, the
engine will not start or will shut down immediately:
1. The hood is opened.
2. The brake pedal is pressed.
3. Move the optional remote start enable toggle switch to OFF position.
(If installed)
4. Engine is over-revved. {“Tachometer checking type” only}
5. The pre-programmed run time (5 /10 / 20 / 30 minutes) has elapsed.
6. Transmitter button is pressed.
7. The vehicle refused to start running after {3} unsuccessful attempts.
G. DISABLING THE REMOTE START SYSTEM: (If installed)
This feature allows your system’s remote start unit to be temporarily
disabled to prevent the vehicle from being remote started accidentally.
This feature is useful if the vehicle is being serviced or stored in an
enclosed area. To disable the remote start, move the optional remote
start enable toggle switch to the OFF position.