Filter
Top Products
AUTOMATIC RE-ARM (See Alarm Feature “I - 3” Programming):
If this feature is selected, the security system will automatically re-arm
itself 60 seconds after disarming with remote transmitter. Automatic re-
arm will cancel if any door is opened before the 60 seconds timer has
elapsed.
D. DISARMING WITHOUT A TRANSMITTER
The Override function may be used if the remote transmitter is lost or
inoperative.
1. Enter the vehicle and turn the ignition switch to ‘ON’ position.
2. Within 10 seconds push and release the valet switch
The alarm will enter the disarm mode. You can now start and operate
the vehicle normally.
E. VALET MODE: (System in Disarm or Valet mode)
The valet switch allows you to temporarily bypass all alarm functions,
eliminating the need to hand your transmitter to parking attendants or
garage mechanics. When the system is in valet mode, all alarm functions
and remote start functions are bypassed, however the remote panic fea-
ture and remote door locks will remain operational. To use the valet mode,
the system must first be disarmed either by using your remote transmit-
ter, or by operating the Manual override sequence.
Enter Valet Mode:
1. From the disarmed condition, turn the ignition to “ON” position.
2. Push and hold valet switch for 2 seconds until the LED turns on. The
LED will remain on as long as the system is in ‘valet mode’.
Exit Valet Mode:
1. Return to normal operation, turn ignition ‘on’.
Push and hold valet switch for 2 seconds, The LED will turns off
indicating the system has exited the valet mode.
F. PANIC FUNCTION:
The transmitter can be used as a remote panic switch to manually trig-
ger the alarm in case emergency.
1. Press and hold the button for 3 second. The alarm will immediately
sound.
2. During panic mode, the normal function of this transmitter button will
be suspended. The and buttons can be used to lock and un-
lock the doors (if the option is installed), however once the button is
pressed, the vehicle’s starter disable device, (where installed) will be
enable allowing the vehicle to start.
3. To stop the alarm, press and hold the or button on the
transmitter again for 3 seconds. Also if any transmitter button other
than the or button is pressed and released, the panic mode
will be turned off immediately.
4. If no buttons are pressed, the alarm will automatically stop after
60 seconds.