Filter
Top Products
REMOTE START OPERATIONS
WARNINGS:
As with any product that performs automatic functions, there are certain
safety precautions that you must practice and be aware of.
1. Keep the transmitter out of children’s reach.
2. Do not leave anyone in the vehicle while running on remote control.
3. Alert servicing personnel that the vehicle can be started automatically.
4. Do not start the vehicle by remote while it’s in an enclosed area or ga-
rage.
5. Always apply the parking brake and lock the vehicle as you exit the
vehicle.
6. Should the unit malfunction, disconnect the fuse until the problem is
corrected.
7. The use and operations of this system is the sole responsibility of the
operator.
8. Some areas may have local ordinances that prohibit leaving a vehicle
running on public streets.
A. TO REMOTE START THE VEHICLE:
When you want to start your vehicle,
1. Press button on the transmitter for 1 second.
2. The parking light will activate to indicate the remote start received the
signal.
3. The engine will start in approximately 5 seconds.
4. Once the engine is running, after a couple of seconds the parking
lights will turn on again and the climate controls will be activated ad-
justing the vehicle’s interior temperature to your preset setting.
5. The vehicle will run for 5, 10, 20 or 30 minute programmable cycles
and then automatically shut down.
NOTE:
The Remote Start Unit will not start the vehicle if any one of the following
conditions exists:
1. The hood is opened.
2. The brake pedal is pressed.
3. The optional remote start enable toggle switch is moved to the OFF
position. (If installed)
4. The gear selector is in any gear other then “PARK” or “NEUTRAL”