Filter
Top Products
RF-502
1
RF-502 OPERATION INSTRUCTIONS
A. REMOTE CONTROL TRANSMITTER OPERATION
The new remote control transmitter (XT-54) included with the RF-502
offers the code rolling feature which will prevent illegal use of a code-
grabber with an attempt to record the code of your transmitter.
1. ARM/DISARM
TO ARM THE RF-502
Press the ON/OFF button once to arm.
The siren will chirp one (1) time, the
lights will flash, and all doors will lock.
(*)
TO DISARM THE RF-502
Press the ON/OFF button once to
disarm. The siren will chirp two (2) times, the lights will flash, and all
doors will unlock.(*)
NOTE(*): Your vehicle must be equipped with power door locks and
optional relays may be required to allow alarm control over the vehicle
door locks. Additionally, all doors will lock automatically each time the
ignition key is turned on, and unlock automatically each time the ignition
key is turned off. Please see Section (I) "IGNITION CONTROL POWER
DOOR LOCK SYSTEM".
2. TEMPORARY CHIRP DELETE FROM REMOTE
Upon approaching the vehicle (whether armed or disarmed) push the
AUX button on the remote control transmitter for half (0.5) second, then
very quickly push the ON/OFF button on the transmitter to arm or disarm
in the usual manner. The chirp sound will be silenced only for this