Filter
Top Products
RF-302
4
NOTE: Both VALET and OVERRIDE functions are performed from the
same switch.
1. OVERRIDE FUNCTION
The OVERRIDE FUNCTION may be used if the RF-302 remote is lost or
inoperative. To operate the OVERRIDE FUNCTION, enter the vehicle
(siren will sound); switch the vehicle ignition to ON. Move the
VALET/OVERRIDE switch to ON; then OFF; the siren will stop. The RF-
302 will be disarmed. Quickly replace or service the remote transmitter
to insure continued vehicle protection.
2. VALET FUNCTION
The RF-302 may be placed into the VALET (stand-by) mode to allow for
vehicle service, car washing, or attendant parking without self arming
after the ignition is switched off, and without leaving the RF-302 remote
control with unauthorized individuals.
To operate the VALET FUNCTION turn the vehicle ignition to on and
move the VALET/OVERRIDE SWITCH to ON.
To return to normal operation turn the vehicle ignition to on and move the
VALET/OVERRIDE SWITCH to OFF.
3. KEYLESS ENTRY MODE
In the valet mode, the vehicle doors can be locked and unlocked using
the remote. However, there will be no chirp confirmation; it is strongly
recommended that the driver visually confirm that the doors are locked.
E. PASSIVE/MANUAL ARMING OPERATION
(Optional at installation)
Passive/Manual operations can be selectable if an optional toggle
switch is installed. Consult your installing dealer.