Filter
Top Products
2
TRANSMITTER OPERATION
Transmitter Button
System Function
Remark
Button
Lock door
/ ARM
ARM (OPTIONAL)
– Button
Arm and Delete
Optional Sensor
Press twice.
(OPTIONAL)
Button
Car L
ocator
While System Armed.
Button for 3 seconds
Panic function
Press 3 seconds
Button
Unlock Door
/
DISARM
– Button
Two Steps Door
Unlock & Disarm
System
Press twice within 3
seconds.
Button for 2 seconds
Pop Trunk Release
Press 2 seconds
+ Button
Silent
LOCK /
UNLOCK
Ignition in "OFF"
position.
+ Button for 1 seconds
Activate Car
-
Jacking
(OPTIONAL)
Ignition in
"ON"
position.
*
SILENT LOCK /
UNLOCK
II
Switching code For
2nd Car Operation.
ACTIVE LOCKING – LOCK & OPTIONAL ARMING:
1. Press
button on transmitter.
2. The siren or horn will chirp once and the parking lights will flash once
indicating that the system is now armed. The vehicle doors will lock
upon arming when interfaced with the security system.
Note: Defective sensor reminder: If the siren or horn sounds 3 chirps,
then you have left a door, trunk, or hood lid ajar. (OPTIONAL)
SILENT LOCKING AND UNLOCKING : ARMING / DISARMING: Press
the
+
button together on the transmitter to LOCK or UNLOCK your
security system, No chirp sound will be heard; arm / disarm confirmation
will be through the vehicles parking lights only.
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Pressing the
button on the transmitter twice within 3 seconds will arm the security
system and by-pass the shock sensor. The system will chirp one additional
time to confirm the sensor bypass mode was activated. The sensor bypass
feature is programmed to activate for one arming cycle only. The security
system will return to normal operation during the next arming cycle
PASSIVE LOCKING OR ARMING : Programmable
Active arming / disarming is controlling your security system via the remote
transmitter. This security system is equipped with an optional Passive