Filter
Top Products
128-7404A
20 of 24
Page 20
(j) You can set the Countdown Timer
(k) You can set the Alarm Clock
(l) You can set the Clock
Your transmitter has a battery indicator that is shown in the upper
right
corner of the screen as shown left. This icon indicates a new battery
shown with 3 bars. As the battery deteriorates, the bars will disappear. 1
bar indicates the battery should be replaced. Replace battery with a fresh
1.5V AAA battery and dispose of the used battery properly.
Other icons that will be displayed at times when certain functions
and features are active in the vehicle or on the remote:
Range Indicator. The range indicator will have bars to the side of the
icon if the unit is out of range.
Vibrate Mode On, this icon will be displayed if you select vibrate
instead of tones. To toggle vibrate on and off, press "F" + Unlock
simultaneously.
Alarm Clock. This icon will be toggled on and off when the "F" +
Trunk/Key buttons are pressed simultaneously. The feature must be
set in the feature selection menu of the transmitter.
Count Down Timer . This icon is toggled on and off by pressing the
"F" + Option buttons simultaneously. The feature must be set for a
time in the feature selection menu of the transmitter.
Power Save Feature. Press the "F" and Lock buttons simulta-
neously to toggle this feature on and off. With this mode on, the
battery in the transmitter will go into a power down mode when the
unit is disarmed.
24 Hour start Timer. This icon is displayed when the 24 hour start
timer is activated. Press the option+lock buttons simultaneously for 3
second. The transmitter will beep and display the 24 hr timer. The vehicle
will start automatically when the time set is reached. (See chart for time
settings). Pressing this button combination a second time will toggle this
feature off. Note the transmitter must be within range of the vehicle to set
this feature and within range to cause the vehicle to start at the preset
time. The unit will start at the prescribed time once only. This function
must be selected each time you want the vehicle to start. To activate this
function, (a) Turn the ignition switch off. (b) Within 10 seconds of step (a),
depress and hold the brake pedal, while pressing the key icon transmitter
button 2 times. (c) the unit will emit 2 chirps, the transmitter will beep and
the start timer icon on the display will remain on.
Temperature Start Mode. This icon will appear when the temp start
mode is activated. The vehicle will start one time automatically when
the temperature reaches 0*. Caution, Be certain vehicle is outside
before activating this mode. To toggle this feature on of off, from the
Locked/Armed mode, press the Option and Lock buttons simultaneously.
(Available on certain remote start models only).