Filter
Top Products
Page 15
When the Remote Start Function has been Operated, The three exhaust bars
turn "ON", on the LED screen. Once the vehicle is running, the three bars will
flash all the while the vehicle is running.
When Panic Mode has been activated and the system is armed the vehicle's
lights and the word ARM will flash on the LED screen. If the system is dis-
armed, and the Panic Mode is activated, only the lights will flash on the LCD
screen.
When ever the vehicle is operated from the two way transmitter, the unit will
beep responsive to the function executed at the vehicle. 1 beep when armed, 2
beeps when disarmed, etc... at times It may be inconvenient or too noisy to
hear the beep tones, so the system allows you to set the unit for vibrate mode.
To toggle on or off beep tones/vibrate, press the red button and button 3
simultaneously.
The unit will vibrate and the mute icon will be displayed, indicating vibrate is on, or
the unit will beep and no icon displayed, indicating beep tones are active.
If the alarm system has been triggered, the icon displayed on the transmitter LCD
will indicate the which zone has been activated, as well sound the beep tones, or
vibrate dependent upon the setting as shown above. The following trigger pat-
terns will be displayed.
Triggered and the entry attempt was made to one of the vehicle doors.