Filter
Top Products
providing it
is
within range of the device it is controling, will operate the device. This
option button can
be
programmed into a number of Audiovox accessories.
If
the accessory
is
a second two way Audiovox Remote Start Unit, perhaps installed
in
a second vehicle,
then the
vehicle will act upon the command but only the prime transmitter for that vehicle
will indicate the command was acted upon.
Toggling Between Vibrate, Chirp,
or
Both
Chirp
& Vibrate:
The two way transmitter offers the option of having Beep Tones,
Vibration, or Both Beep
Tones
& Vibration associated with the function responses of the transmitter.
To
toggle between these modes, press simultaneously the
"F"
function button and the
Unlock Icon Button. The transmitter will beep, beep & vibrate, or vibrate only toggeling
on
the specific preference.
Check
Vehicle Status:
Press the lock+key+option buttons
simultaneously for 1 second. The vehicle's alarm will
display
the systems current status breifly
by
flashing the
LED
associated with the state the
vehicle was left
in.
This feature
is
useful
if
you do not want to wait the 10 seconds for a LED
to
display the status or
if
you just want to check the status without operating the Lock or
Unlock buttons.
SAFETY
CONTROL SWITCH
The
red
handle control switch allows you to temporarily disable the remote starting function of
the system and moving this switch to the
Off position
is
recommended whenever the vehicle
is
being serviced. When the system
is
disabled, the remote door locks and optional accessories
will remain operational.
RunTime
Door
Lock
Timer
Lights
5Min 0
1
Secl1
Sec
0
Pulse
0
FUNCTION
SETTING
CHART
To
be
completed
by
installer
10MinD 15MinD
3.5
0 1
Sec/Obi
1
Sec
0
Steady
0
Option
Button
Programmed
To
Control
__________
_
©
2003
Audiovox
Electronics
Corp.,
150
Marcus
Blvd.,
Hauppauge,
NY
11788
20
Min
0
128-6688
128-6688
4 of 4