Filter
Top Products
KEYLESS
ENTRY
1.
The
Lock
button
on
the transmitter
is
used
to
lock the vehicle's doors,
the
Unlock button
is
used
to
unlock the vehicle's doors.
To
lock or unlock
the doors simply press and release the desired function button one time.
As
a keyless entry unit, for your convenience,
the
parking lights will flash
once
when
the doors
are
locked and twice
when
the door
are
unlocked.
REMOTE
CAR
FINDER
The Lock or Unlock buttons
are
also used
to
access
the
car finder
mode.
This feature
is
particularly useful
in
a crowded parking lot where finding
your car may
be
difficult.
To
access the car finder mode, while within
range
of your
car,
simply press and hold either the lock or unlock button of
your transmitter for three seconds. The parking
lights will begin to flash
making your
vehicle more visible. The lights will stop automatically after 30 sec-
onds.
If
you
wish
to
tum off
the
car finder mode prior
to
the expiration of the 30 second
timer,
press
and
release either the lock or unlock button of your transmitter
one
time
REMOTE
STARTING
THE
VEHICLE
The
APS-55 will not start the vehicle if
anyone
of the following situations exists;
The vehicle's hood
lid
is
opened.
The
gear shift selector
is
not
in
Park.
The
brake pedal
is
depressed.
The
safety control switch
is
in
the Off position.
1.
To
start the vehicle, press
and
release the Key/Option button two times within 2 seconds.
The vehicle
will start and
remain
running for the pre-programmed 5,10,15,20 minute
run
cycle.
As
a visual indication, the parking lights will flash or remain
on
depending
on
the setting
by
your installation center.
2.
When
you
arrive at the vehicle, tum the ignition key to the
ON
position (not the spring
loaded start position), then step
on
the brake pedal
to
disengage the remote starter.
The
vehicle will continue to
run,
but now
on
it's
own
power.
NOTE:
The engine will stop running before the pre-programmed
run
cycle has expired if
you
perform
anyone
of the following functions;
-Press
and
release
button
2
on
the keychain transmitter two times
within
2 seconds.
-Depress the brake
pedal.
-Open
the vehicle's hood
-Move
the
safety control switch
to
the Off position.
Your
APS-55TW
is
also packaged
with
a two way confirming transmitter
shown
Right which
has
Icon
LED's
to
indicate
the
function and status of your vehicle.
The top
LED
indicates:
~a)
Transmit,whenever a transmitter button
is
operated this
LED
will tum
on
Green.
b)
Out of
range,
when
after pressing a transmitter button, if the unit does not
receive the command, this
LED
will turn
on
Red
and the transmitter will beep
twice indicating the command was not received or acted upon
by
the unit
in
the vehicle.
c)
Low
Battery, if
when
pressing any transmitter button, this
LED
illuminates
Red.
The Lock
LED
Indicates:
128-6688
2 of 4