Page 8
1
12
10
2
4
9
5
6
8
7
11
3
3
3
Instruments
e
Coolant temperature gauge
r Rev counter
t Warning and indicator lamps
u Speedometer
i Switch for parking system plus/advanced
o Reset button for trip recorder
p Check button for:
p Activating mileage recorder display and clock
Press button with ignition switched off.
p Calling up driver messages again
Press button briefly when warning symbol appears.
p Setting speed warning 1
Press button briefly when desired speed is reached.
To cancel: press button for at least 1 second while
vehicle is moving.
a Adjuster buttons for instrument lighting
s Fuel gauge
d Trip/mileage recorder
f Display for:
p Driver messages, digital speedometer
p Cruise control system
p Warning symbols and auto-check control
p adaptive air suspension
p Radio, CD, TV and telephone
p Outside temperature
p On-board computer (with two memories)
p Navigation system, selector lever position
p Service interval display
g Digital clock and date
Stickers for:
e Fuel grade
r Tyre pressures
1
2
Power-operated towing bracket
To extend/retract the power-operated towing bracket,
switch off the engine and press the rocker switch e
(on the right in the luggage compartment).
Extending: Remove the bumper cover. Briefly press the
top of the rocker switch
e.
Retracting: Remove any accessories from the ball head
and make sure the electrical connector is unplugged.
Briefly press the bottom part of the rocker switch
e.
Replace the bumper cover.
Loading mode
Switching on: Close all doors and
press the bottom part of the rocker
switch
r. The rear of the vehicle will then be lowered.
Switching off: Press the top of the rocker switch
r.
The rear of the vehicle will be lifted.
Note:
The system can also be switched on/off in the
MMI (CARR SETUP).
1
2
Filling the tank
Opening the tank flap: Press the switch
on the driver’s door. Unscrew the tank cap
anti-clockwise and hook it onto
the flap. When closing
the tank flap, make
sure you hear it
click into place.