Audi Q7 Automobile User Manual


 
Page 6
[11] Control lever for windscreen wipers/
washer and on-board computer
Windscreen:
Wipers off
e Brief wipe
r To activate intermittent wipe/rain sensor: Move control
to set sensitivity level of rain sensor (wiper delay intervals).
t Slow wiper speed
u Fast wiper speed
i Automatic wash and wipe: Pull lever towards you and hold.
Rear window:
o Intermittent wipe: Press lever towards dashboard.
p Automatic wash and wipe: Press lever as far as it will go
towards dashboard and hold.
Controls for on-board computer
Press the top or bottom of rocker switch to show the various
computer displays in turn. Press and hold RESET button to
return the current display to zero.
Function selector for display modes
Press RESET button repeatedly to select the displays for the
on-board computer, digital speedometer, navigation
and
adaptive air suspension
in turn.
1
2
3
4
[28] Electric windows
Press/pull the corresponding switch just past
the first stop and hold until the window
has reached the desired position.
”One-touch” function
Press/pull the switch briefly past the
second stop.
Safety switch
Activates/deactivates rear
electric windows.
[27] Adjuster for exterior mirrors
Turn the adjuster to select:
e Left exterior mirror
r Exterior mirror heating
t Right exterior mirror
u Retract both exterior mirrors
Press the adjuster to move the mirror
glass in the desired direction.
Note:
When adjuster knob is in
position
r the mirrors are heated
automatically at low outside tempera-
tures (while ignition is switched on).
2
1
4
5
3
1
0
2
3
4
B
C
A
5
7
6
8
9
10
11
[9] Turn signal and main beam lever with button for lane assist
e Button for lane assist
r Right turn signals (with ignition off: right parking light on)
t Left turn signals (with ignition off: left parking light on)
u Main beam headlights
i Headlight flasher
[8] Controls on multi-function steering wheel
The multi-function steering wheel offers fast and simple control
of selected functions of the MMI system.
Accessing the submenus
Press MODE button
s repeatedly to access the available
submenus.
Left thumbwheel
Roll the left thumbwheel
a to mark the desired menu option.
Press the thumb wheel a to confirm the option.
Speech dialogue system
p To activate the system, briefly press the talk button
d and say
a command after the <Beep>.
p To end the dialogue, press and hold the talk button d until
the system responds with <Cancel>.
p Say <HELP MMI> to receive general information about the
operation of the speech dialogue system.
p Say, for example, <HELP Radio> to call up the voice
commands used for operating the radio.
p Say <HELP> at any point to receive assistance with the current
function being used.
Right thumbwheel
Roll the right thumbwheel
f to adjust the volume as desired.
Press the thumbwheel f to have the last navigation direction
repeated.