Filter
Top Products
ACTIVATE PANIC MODE
1. Press and hold Button #1 for three seconds.
2. The park light will begin to flash and the siren will activate.
PANIC MODE DISABLE
- Press and release Button #1 to disable Panic Mode and lock the doors.
- Press and release Button #2 to disable Panic Mode and unlock the doors.
Note :Panic Mode will stay activated until disable by the remote
Transmitter.
Page 5
2WAY REMOTE STARTER/ ALARM
OWNER ’S GUIDE
1. Press and hold button #2 and the doors will unlock,
continue holding the unlock button, the trunk release will activate. The
trunk release will be confirmed by one park light flash and one siren chirp.
Note: The trunk release output will not activate when the ignition key is in the
On position.
(Optional to button #4*)
*The trunk release output may be programmed to operate on button #4.
1.Press and release button #1 on the remote transmitter.
2.The park lights will flash and the siren will chirp one time.
3.The doors will lock.
4.The LEDs on the antenna will start flashing within five seconds.
Note: If installed, the starter disable will activate.
* To Lock without siren chirps, press buttons #1 and #2 at the same time.
1.Press and release button #1 on the remote transmitter.
2.The park lights will flash and the siren will chirp two times.
3.The doors will unlock.
4.The LEDs on the antenna will stop flashing.
Note: If installed, the starter disable will deactivate.
* To Lock without siren chirps, press buttons #1 and #2 at the same time.
Lock Doors and Arm Alarm
Alarm Features
Unlock Doors and Disarm Alarm
Trunk Release
1. Press and hold button #2 and #3 for 3 seconds.
2. The park lights will flash and the siren will chirp five times.
3. The remote will beep and display the systems current status.
Car Finder Mode
Panic Mode
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4