Alpine SEC-8063 Automobile Alarm User Manual


 
74
English
Advanced
Operation
Optional Radar Sensor
Adjustment Mode
Remove the key from the ignition.
Turn the Disarm/Valet switch ON and hold it
for one second.
The extension LED will glow for one second.
Press and release the TX/PANIC and EXT1/
VALET buttons simultaneously.
"RADAR SENSOR ADJUSTMENT MODE" is
scrolling on the Security Display Module. The
system is in exterior (EXTerior) radar sector
adjustment mode.
The TX/PANIC button will increase the field
while the EXT1/VALET button decreases the
field. A number from 1 to 30 will appear
representing the level of coverage. The
greater the number, the greater the cover-
age. When finished adjusting the exterior
radar sector, proceed to step 5 .
TX/PANIC button: UP
EXT1/VALET button: DOWN
Note: If motion is sensed, the Extension LED
will blink 6 times.
1
2
VALET
3
4
and/et/y
ACC
OFF
ON
RUN
TX
PANIC
EXT 1
VALET
TX
PANIC
EXT 1
VALET
or/ou/o