Alpine SEC-8058 Automobile Alarm User Manual


 
100
English
Advanced
Operation
2.
#
1
Activating Anti Car-Jack
Mode (Method 1)
Anti Car-Jack Mode provides an additional
level of security in the event of a carjacking
or forced vehicle theft. When activated, Anti
Car-Jack mode will first warn the user by
"beeping" the remote control transmitter,
blinking the Extension LED rapidly (and
displaying a warning screen on the CVA-
1000, if installed), and after sixty seconds,
entering full alarm mode.
This section will describe how to arm the
SEA-8081 security system in Anti Car-Jack
mode.
Note: MAKE SURE THAT THIS FUNCTION
IS COMPLETELY UNDERSTOOD
BEFORE IT IS USED. Please contact
your Alpine dealer if you have any
questions regarding this feature.
Press and release the EXT2/EXT3 and EXT
SELECT buttons simultaneously (when the
system is disarmed.)
Within 15 seconds, press and release the TX/
PANIC button to set the system to the arming
mode.
“ANTI-CARJACK ARM” will be shown on the
display of the remote control transmitter.
Press and release the TX/PANIC button.
“ANTI-CARJACK DISARM” will be shown on
the display of the remote control transmitter.
Now the Car-jack mode is activated.
Notes:
When using the function, the Dip switch
(S502-1) on the SEA-8081 Main Unit must
be ON. Consult with the Alpine dealer.
When driving the car, always release the
Car-jack mode.
1
(SEA-8481)
E
X
T
2
/
E
X
T
3
E
X
T
S
E
L
E
C
T
and/et/y
2
ANTI--
3
ANTI--
TX
PANIC
(SEA-8481)
TX
PANIC
(SEA-8481)