Alpine SEC-8057 Automobile Alarm User Manual


 
90
English
Advanced
Operation
Sensor Adjustment (Im-
pact Sensor)
Remove the key from the ignition.
Turn the Disarm/Valet switch ON and hold it
for two seconds. The Extension LED will glow
for 1 second.
Press and release the TX/PANIC and EXT1/
VALET buttons simultaneously.
(The Radar sensor adjustment mode is on.)
The system will enter exterior radar sensor
adjustment mode.
Turn the Disarm/Valet switch ON and hold it
for two seconds. The siren will "beep" one
time.
(The Impact sensor adjustment mode is on.)
Press and release either the TX/PANIC or
EXT1/VALET button to make sensitivity
adjustments. "1" represents a lower sensitiv-
ity whereas a "15" represents a higher
sensitivity required to trigger the security
system.
TX/PANIC button: UP
EXT1/VALET button: DOWN
Note: If sensed, the Extension LED will blink
once.
1
2
VALET
3
and/et/y
E
X
T
1
/
V
A
L
E
T
TX
PANIC
(SEA-8481)
4
3.%
VALET
ACC
OFF
ON
RUN
5
E
X
T
1
/
V
A
L
E
T
TX
PANIC
(SEA-8481)
or/ou/o
IMPAC
01
IMPACT PRE-WARN ADJ
01~15