Filter
Top Products
43-EN
The Playlist mode*
2
:
*
2
To switch the Program mode display to the Playlist mode display on
the DVD mode main screen, play back via program or playlist
search. Refer to “
Searching by Program” or “Searching by Playlist”
(page 41).
• Only discs containing a Playlist can be displayed.
Searching by Title/Program/Playlist
Use this function to easily find positions on the DVD using the DVD’s
titles, programs or playlists.
1
Touch [P1/2]* while playback is stopped.
The function guide appears.
* Touch [P1/3] while playing a DVD-VR disc.
2
Touch [10KEY].
The numeric keypad input mode screen appears.
3
Enter a desired title, program or playlist by touching
its title, group, program or playlist number.
See page 40 for operation of the numeric keypad.
4
Confirm your selection by touching [Enter].
Playback will start from the title number selected.
• To switch the Program mode display to the Playlist mode display on
the DVD mode main screen, play back via program or playlist
search. Refer to “
Searching by Program” or “Searching by Playlist”
(page 41).
• This function cannot be used on discs on which no title numbers are
recorded.
• Playback starts from the beginning of the chapter/track number in the
state of Pre Stop.
• Some disc may not accept any operation.
Searching Directly by Chapter Number
Use this function to easily move to the beginnings of the chapters or
tracks on the disc.
1
Touch [P1/2]* in any mode other than stop mode.
The function guide will appear.
* Touch [P1/3] while playing a DVD-VR disc.
2
Touch [10KEY].
The numeric keypad input mode screen will appear.
3
Touch and enter the chapter number you want to
play.
See page 40 for operation of the numeric keypad.
4
Touch [Enter] to confirm your selection.
Playback will start from the selected chapter or track.
• This function is not available for a disc on which chapters or tracks
are not stored.
Switching the Angle
On DVDs in which scenes have been filmed from multiple angles, the
angle can be switched during playback.
1
During playback, touch [P1/2].
The function guide changes.
2
Touch [ANGLE].
The angle switches between the angles recorded on the
disc every time the button is touched.
• Some time may be required for the angle to change.
• Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed first, after which the angle switches.
Switching the Audio Tracks
DVDs with multiplex audio or audio languages allow switching the
sound during playback.
1
During playback, touch [P1/2].
2
Touch [AUDIO].
The sound switches between the alternate audio tracks
recorded on the disc every time the button is touched.
• The alternate track selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that track, the disc’s default language is selected instead.
• Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVDs menu.
• There may be a delay before the selected alternate track begins to
play.
DVD-VR disc with multiplex audio
1
During playback, touch [P1/3].
The function guide changes.
2
Touch and hold [AUDIO] for at least 2 seconds.
The left and right channels will be output as shown below,
each time the button is touched.
All playlists are played
repeatedly.
The chapter is played
repeatedly.
The playlist is played
repeatedly.
Repeat Disc
Repeat
Repeat Playlist
AUDIO LL AUDIO RR AUDIO LR AUDIO LL