ALK Technologies Pocket PC 6 Bluetooth GPS Receiver User Manual


 
- 40 -
Routing Options
Trip Summary
Click the Options button in the
Trip Planner window to access
CoPilot routing options.
Auto and Quickest is the
default setting, and provides the
quickest routing for automobiles
based on practical considerations
such as road quality, terrain, and
urban/ rural classifications. RV
routing favors major roads and
avoids sharp turns and U-turns
where possible.
Click Advanced to set general
road preferences.
Drag the sliding bars to the left
or right to avoid or favor each
road type.
Set the road speeds CoPilot uses
in its route calculations for each
type of road by either typing or
clicking the up and down arrows
under Rural and Urban for each
road type.
Select Run in the Trip Planner
window to run the trip.
The Trip Summary will show start
and end places, and the number of
stops in between them.
Total distance and time for trip.
Estimated fuel cost for your trip
based on entries in the Fuel Cost
Calculator (Trip menu).
Click OK to view map and
driving directions.
Fuel Cost Calculator
To calculate an estimate of your
fuel costs for a trip, select Fuel
Cost Calculator from the Trip
menu before you run your route.
Fill in the average cost per gallon
of fuel that you expect to pay,
and the distance per gallon you
can expect to get in your vehicle.
Click OK, then run your trip. A
fuel cost estimate based on what
you entered will be calculated
and shown in the Trip Summary
that CoPilot creates for every
trip you run.