Filter
Top Products
F
F - 14
PLUMBING
GALLEY FAUCET, MOEN PURETOUCH® CLASSIC (Option Safari)
1-800-374-6542
WATER FILTRATION SAFEGUARDS
Your Moen PureTouch® Classic Filtering Faucet System integrates carbon block filtra-
tion technology designed by Culligan International into a faucet spout. This technology
is fast and effective at reducing contaminants commonly found in water and is certified
by NSF® International. The PureTouch Filtering Faucet System and installation must
comply with State and Local laws and regulations. To ensure optimal operation of your
new Moen faucet, please read the following safeguards carefully.
MicroTech™ Filter Cartridges
• MicroTech filter cartridges will reduce:
Chlorine, Taste and Odor (MicroTech 400, 600)
Lead (MicroTech 400,600)
Cysts (Cryptosporidium, Giardia) (MicroTech 600)*
*The contaminants removed or reduced by this filter are not necessarily in your
water.
• Do not use with water that is micro biologically unsafe or of unknown quality
without adequate disinfections before or after the system. Systems certified
for cyst reduction may be used on disinfected waters that may contain filter-
able cysts.
• MicroTech filter cartridges are designed for replacement after dispensing 200
gallons of filtered water. Water conditions and usage may affect filter life and
water taste.
• The electronic indicator will signal when filter replacement is necessary
• Use only MicroTech 400 or 600 filter cartridges with the PureTouch Classic
Filtering Faucet System.
• Filter flow rate = .4-.5 gpm at rated pressure (20 psi min. – 125 psi max.).
Water Temperature
• Minimum/Maximum faucet operating temperature = 40 degrees –
150 degrees F
• CAUTION: Do not filter water above 100 degrees F.
MicroTech Filter Flushing Instructions
• New MicroTech Filter Cartridge: Allow cold water to run through a new filter for 5
minutes to flush out any loose carbon particles. Once these small black specks
are washed out the filter is ready for use.
• Daily Use: Allow cold water to run through the filter for 10-15 seconds prior to
first use. If the filter has not been used for two days, run cold water through the
filter for 60 seconds prior to use.
Questions
• If you have any questions please call our toll-free help lines:
1-877-DRINK-H20
Monday through Friday 8:00 a.m. to 8:00 P.M.
1-877-374-6542
Saturday 8:00 a.m. to 6:30 p.m.