Filter
Top Products
Acumen Electronics Ltd
15 Glenmore Bus Pk
Colebrook Way
Andover
Hants
SP10 3GQ
UK
Tel; +44 (0)1264 359922
Fax; +44 (0)1264 359933
www.acumen-electronics.co.uk
Acumen SP500 Universal Speedo
The speedometer is designed as a universal fit.
You will need to perform some slight assembly on it, to suit your own individual requirements.
The Acumen Universal Speedometer consists of;
1. A Speedometer head sub-assembly. – without fascia
2. Electronic pick-up for the speedometer
3. Fitting and Literature kit.
Fitting instructions
Speedometer
The SP500 speedometer has 5 warning lights built into the system. These are all white LED’s so you can
identify the LED’s with the coloured icons provided. The Icons are EC standard icons.
Of the 5 Indicator LED’s, two need to be switched to ground (earth) to illuminate – such as for oil
pressure or Neutral light, and three need to be switched to 12V to illuminate – such as for indicators, main
beam or lights-on.
The drawing below will indicate how the warning lights are switched.
NOTE. Acumen recommend you use one of the LED lights as a ‘lights-on’ indication. As the
Speedometer is permanently illuminated, there is no ‘lights-on’ indication.
Some countries may require to use such an indicator if the motorcycle lights can be switched off and on.
Page 1