About the mixer
The mixer of the MRS-1044 is divided into two sections:
an "input mixer" that processes the input signals from the
[INPUT 1/2] jacks, and a "track mixer" that processes the
signals from the tracks of the recorder section and from the
rhythm section. Details of each mixer are described below.
■
Input mixer
In the input mixer you can adjust the sensitivity of the
signals that are input from the [INPUT 1/2] jacks, set
various parameters such as pan and send levels to the
send/return effects, and assign the signals to the recorder
tracks.
The parameters that can be adjusted in the input mixer are
listed in the following table.
■
Track mixer
In the track mixer you can process the playback signals of
the recorder tracks (1 – 6, 7/8, 9/10) and the sound of the
drum kit / bass program of the rhythm section, and mix
these signals to stereo. The signal mixed by the track mixer
is output via the MASTER fader from the [OUTPUT]
jacks.
In the track mixer, the signals that are output from each
track are handled in units called "channels." The
parameters that can be adjusted for each channel (DRUM,
BASS, 1 – 6, 7/8, 9/10) are listed in the table below.
The DRUM, 7/8, and 9/10 channels are each stereo
channels that respectively process the output signals from
the drum kit, stereo tracks 7/8, and 9/10. The parameters of
these stereo channels are linked.
