www.vtechphones.com
44
Answering system operation
Set new message tone
This feature programs the system to beep every 10 seconds to alert you of new
messages. The beep will stop when all new messages have been reviewed.
• Press the softkey
MENU when in idle mode.
• Press the softkey
twice to reach ANSWERING SYSTEM. Press the
softkey SELECT to conrm.
• Press the softkey
once to reach NEW MESSAGE TONE, and press the
softkey SELECT to conrm.
• Use the softkey
or to toggle between ON and OFF. Press the softkey
SET to conrm, and there will be a conrmation tone.
Setting answering system
Set security code
A four-digit security code is required to access the answering system from
any touch tone telephone. The factory default code is 4321.
• Press the softkey
MENU in idle mode.
• Press the softkey
twice to reach ANSWERING SYSTEM. Press the
softkey SELECT to conrm.
• Press the softkey
twice to reach SECURITY CODE, and press the softkey
SELECT to conrm.
• Press the softkey
CHANGE to change the digit. Press the softkey NEXT
to move the cursor to the next digit.
• Press the softkey
SET when nished, and there will be a conrmation
tone.
• Use the softkey or to toggle between ON and OFF. Press the softkey
SET to conrm, and there will be a conrmation tone.
