www.vtechphones.com
31
Basic operation
From the base unit to the handset
• During a call, press HOLD to put the call on hold.
• Press
INTERCOM, and use the softkey or to scroll to the desired
handset and press the softkey SELECT to conrm.
• When the target handset rings, press
/FLASH or on the handset to
answer.
•
Press INTERCOM on the base unit to transfer the call.
•
Press /FLASH or press on the destination handset to pick up the
call on hold.
Intercom call
Basic operation
Answer an incoming call during an intercom call
• During an intercom call, there will be an alert tone which signals an incoming
call.
• To terminate the intercom call without answering the incoming call, press
/CLEAR on the handset, or press INTERCOM at the base unit. The
base unit will ring and the incoming call can be answered normally.
• To connect the incoming call with the intercom call,
press /FLASH or
on the handset, or press /SPEAKERPHONE at the base unit to
answer the incoming call.
