2. INSTALLATION AND OPERATION
2.1 UNPACKING AND INSPECTION
Examine packing carton for damage. Notify the carrier immediately if damage is present. Retain the packing carton
for future use.
2.2 INSTALLATION
The UPS should be installed by professional service personnel. To prevent an overbalance of this equipment, the
supporter must be mounted at the bottom of the enclosure. Please install the supporters to the UPS at the bottom of
both sides with six screws ( see figure )
With the installation of the supporters, tipping of the UPS should be prevented. The socket-outlet should be near the
equipment and easily accessible.
Notes:
✍ The UPS should be placed in a flat location with a distance of at least 10cm from the wall to the vent. In
addition, keep the UPS away from heat-emitting sources, direct sunshine, rain, or erosive gas.
✍ Do not place any objects on the top of the UPS.
✍ The function of an alarm silence is available. Users can silence the alarm by pressing the “ON” button.
Press it again will re-activate the alarm (except when the battery is in low-battery mode.)
✍ Press the button and hold it for more than 0.5 second to ensure safe operation.
