✍ Output configurations #1, #2, #3, #4, #5, and #6 are only available on units with an isolation
transformer ✍ Output configuration #7 is only used on units without an isolation transformer
✍ When using the isolation transformer, ensure that the load is balanced.
✍ When using #6 AWG wire 2 in. are required for wire bending space opposite the terminals. 1 1/2 in.
for #8 AWG. 3 in. for #3 AWG and #4 AWG. 3 1/2 in. for #2 AWG.
✍ For 6KVA output configuration #1, use #6 AWG, 75ºC copper wire. For configurations #2, #3, #4, #5,
#6, and #7 use #6 AWG, 75ºC copper wire
- For 10KVA output voltage configuration #1, use #2 AWG,115ºC copper wire. For configurations #2, #3,
#4, #5, #6, and #7 use #6 AWG, 75ºC copper wire.
Tightening torque for pressure wire connectors having screws
Size of grounding electrode conductors (cooper wire)
