TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications
14 TEAC Corporation
4-20. REPEAT SELECT
Sets the Repeat mode.
When this command is transmitted with request data [FF], the controlled device returns the REPEAT
SELECT RETURN command [B7].
Command 37
Data 2 bytes
Return REPEAT SELECT RETURN [B7]
Data 1 Data 2 Description Remarks
0 0 Repeat Off Turns the repeat mode off
0 1 Repeat On Turns the repeat mode on
F F Repeat mode status request Requests the repeat mode status
· If the specified data is other than described above, the controlled device sends ILLEGAL [F2].
4-21. INCR PLAY SELECT
Turns the Incremental Play mode on and off.
When this command is transmitted with request data [FF], the controlled device returns the INCR PLAY
SELECT RETURN command [BA].
Command 3A
Data 2 bytes
Return INCR PLAY SELECT RETURN [BA]
Data 1 Data 2 Description Remarks
0 0 Incremental Play Off Turns the Incremental Play function off
0 1 Incremental Play On Turns the Incremental Play function on
F F Incremental Play function status
request
Requests the Incremental Play function
status
· If the specified data is other than described above, the controlled device sends ILLEGAL [F2].
4-22. FADE IN/OUT SELECT
Sets the Fade in/out mode.
When this command is transmitted with request data [FF], the controlled device returns the FADE
IN/OUT SELECT RETURN command [BE].
Fade In and Out time are set using the FADE IN/OUT TIME PRESET command [2E].
Command 3E
Data 2 bytes
Return FADE IN/OUT SELECT RETURN [BE]
Data 1 Data 2 Description Remarks
0 0 Fade In Off / Fade Out Off
0 1 Fade In On / Fade Out Off
1 0 Fade In Off / Fade Out ON
1 1 Fade In On / Fade Out On
F F Fade In/Out status request Requests the Fade In/Out mode status
· If the specified data is other than described above, the controlled device sends ILLEGAL [F2].
