TASCAM CD-01U/CD-01U PRO RS-232C Protocol Specifications
11 TEAC Corporation
4-12. PITCH CONTROL DATA PRESET
Sets the Pitch Control value from –12.5% to +12.5% in 0.1% steps.
When this command is transmitted with request data ([FF]), the controlled device returns the PITCH
CONTROL DATA RETURN command [A5].
The pitch control function is turned on and off using the PITCH CONTROL SELECT command [35].
Command 25
Data 4 bytes or 2 bytes
Return PITCH DATA RETURN [A5]
Data 1 Data 2 Data 3 Data 4 Description Remarks
0
1
Positive (+) value
Negative (-) value
N2 N3 N1
Preset %
N1: Tens of pitch control value
N2: Units of pitch control value
N3: 1
st
decimal of pitch control value
[Sample] 2010: -2.0%
F F … Pitch Control
value request
Requests the currently set the Pitch
Control value
· If the specified data is out of range, the controlled device sends ILLEGAL [F2].
4-13. TIME SEARCH PRESET
Locates to the specified track and time in minutes and seconds. If the controlled device is in stop or play
mode, playback will start at the specified time. If the controlled device is in ready mode, the playback
position will move to the specified time, and the controlled device will enter ready mode there. The time
specified must be a valid time (e.g. the track must exist on the disc).
This command cannot use for MP3 discs.
Command 2C
Data 12 bytes
Return None
Description Remarks
Data 1 Tens digit of track number
Data 2 Units digit of track number
Data 3 Thousands digit of track number
Data 4 Hundreds digit of track number
Data 5 Tens digit of minutes
Data 6 Units digit of minutes
Data 7 Thousands digit of minutes
Data 8 Hundreds digit of minutes
Data 9 Tens digit of seconds
Data 10 Units digit of seconds
Data 11 Tens digit of frames
Data 12 Units digit of frames
[Sample]
020003001030: 2tr 03m 10s 30f
· If the specified data (Track number and time) does not exist on the disc, the controlled device sends
ILLEGAL [F2].
