■ General
The IC-R10 has an EASY mode which
provides simple operation by only scan-
ning programmed frequency ranges.
When you select EASY mode, 1 of 10
pre-programmed frequency ranges can
be selected.
10 different frequency ranges are pro-
grammed for EASY mode operation in
some transceiver versions; however,
0.5–1300.0000 MHz with FM receive
mode is pre-programmed into all 10
channels in other versions.
Settings for each range are program-
mable. See page 55, before you oper-
ate in EASY mode, in case EASY mode
doesn’t have the frequency ranges you
want or when you want to set up pre-
ferred conditions.
