3
BASIC OPERATION
14
When you know the exact frequency
you want to listen to, the quickest way
to tune it is by direct keypad entry.
Remember that the frequency must be
between 0.5 MHz and 1300 MHz.
The diagram below shows the correla-
tion between the function display fre-
quency digits and the frequency.
1. Select the frequency
Select VFO mode and the receive
mode in advance then:
Push the numeral keys in the same
order as the frequency you want to
tune (including the decimal key).
•If you make a mistake, push [CLR] and
start again.
2. Enter the frequency
When the frequency you want is dis-
played:
Push [ENT] (or numeral keys for the
0.1 kHz digit) to enter it.
•When you select a frequency outside of
the allowed range, the display will revert
back to the previously displayed fre-
quency.
