8
Selecting the OSD
Language
Japanese, English, French, German, Spanish, or Italian
versions of OSD are available.
1 Press the OPTION button.
The “OPTION” OSD appears.
2 Press the ¨./> button to select “LANGUAGE.”
3 Press the >?// button to select the desired
language.
JPN: Japanese, ENG: English, FRA: French,
DEU: German, ESP: Spanish, ITA: Italian
The “OPTION” OSD automatically disappears after about
30 seconds. To turn off the OSD, press the OPTION button
again.
Changing the OSD
Position
You can change the OSD position, for example, when you
want to adjust the picture behind the OSD.
1 Press the OPTION button.
The “OPTION” OSD appears.
2 Press the ¨./> button to select “OSD POSITION”.
OPTION
3 Press the >?// button to move the OSD to the
desired position.
The “OPTION” OSD automatically disappears after about 30
seconds. To turn off the OSD, press the OPTION button
again.
Operating the OSD
Select a parameter using the ¨./> buttons in the OSD
which parameters are arranged in vertical row, and adjust or
select the setting of the selected parameter using the
>?// buttons.
To select a parameter to adjust or select the setting,
press ¨. or > button.
The green ” mark goes to the selected parameter and the
parameter becomes yellow.
To adjust or select the settings of the selected parameter,
press >? or / button.
When adjusting, the bar length and the figure increase or
decrease.
When selecting the setting, the green p goes to the selected
setting.
OPT ION
LANGUAGE
OSD POS I T I ON :
OSD MENU
LOCK
I NPUT : BNC
JPN ENG FRA
DEU ESP I TA
RIGHT BOTTOM
NORMAL EXPERT
UNLOCK LOCK
84.4
kHz/ 72Hz
SELECT
SET
OPT ION
LANGUAGE
OSD POS I T I ON :
OSD MENU
LOCK
JPN ENG FRA
DEU ESP I TA
RIGHT BOTTOM
NORMAL EXPERT
UNLOCK LOCK
SELECT
SET
I NPUT : BNC
84.4
kHz/ 72Hz
