24
Specifications
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 20.1 inch
Input signal format RGB operating frequency*
Horizontal:
28–92 kHz (analog RGB)
28–75 kHz (digital RGB)
Vertical:
48–85 Hz (analog RGB)
60 Hz (digital RGB)
Resolution Horizontal: Max.1600 dots
Vertical: Max.1200 lines
Input signal levels Analog RGB video signal:
0.7 Vp-p, 75 Ω, positive
SYNC signal:
TTL level, 2.2 kΩ,
positive or negative
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75 Ω, negative
(Sync on green)
Digital RGB (DVI) signal:
TMDS (Single link)
Audio output 1 W × 2
Headphones jack Stereo minijack
Audio signal 0.5 Vrms, 47 kΩ
Power requirements 100–240 V, 50–60 Hz,
Max. 1.0 A
Power consumption Max. 80 W
Operating temperature 5–35
°
C
Dimensions (width/height/depth)
Display (upright):
Approx. 520 × 472 × 256 mm
(20
1
/2 × 18
5
/8
× 10
1
/8 inches)
(with stand)
Approx. 520 × 410 × 98 mm
(20
1
/2 × 16
1
/4
× 3
7
/8 inches)
(without stand)
Mass Approx. 12.0 kg (26 lb 7 oz)
(with stand)
Approx. 9.5 kg (20 lb 15 oz)
(without stand)
Plug & Play DDC2B
Accessories See page 7.
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
